Wallace Eannace

MODERN HYDRONICS - RESIDENTIAL & LIGHT COMMERCIAL | NY Location |
2025-03-14 09:00 - 12:00 (America/New_York) | Wallace Eannace – New York, 50 Newtown Rd, Plainview, NY, 11803, United States
Date: March 14, 2025
Time: 9 am – 12 pm
Agenda:

Pumps, Combi boilers
Installation best practices
Water quality and solutions to extend equipment life
Zoning mode easy alternate opportunities to include heat pumps
Service & maintenance
Products to extend equipment life
Combustion analysis

Steam Basics and Optimization (1 PDH)
2025-03-07 12:00 - 13:00 | online
Date: March 7, 2025
Time: 12 pm – 1 pm
Location: Virtual
PDH: 1.0 PDH
Trainer: Robert Barrett
This presentation discusses the basics of steam systems – reviewing steam tables, latent heat, pressure and temperature relationships, etc. One-pipe and two pipe systems are reviewed, along with different return systems. Steam trap types are reviewed in detail. Vacuum condensate return systems are reviewed, along with TRV devices.
Who should attend – HVAC engineers
1.0-PDH Duration: 1-hour PS#20218083

Better Boiler Room Concepts Class | NJ Location |
2025-03-07 09:00 - 12:00 | Wallace Eannace – New Jersey, 779 Susquehanna Ave., Franklin Lakes, NJ, 07417, United States
Date: March 7, 2025
Time: 9 am – 12 pm
Agenda:

Basic to advanced boiler room design
Piping layouts
Individual hydronic components, how they work, and work together
Pump selection
ECM (electronically commutated motor) pumps – why, where, and how to use them.
Zoning options
Air management
Water quality in closed loop hydronic systems
Contractor VIP Rewards program

At conclusion of class, each participating contractor firm will receive:

Certificate of course completion for each participant
Wallace Eannace Contractor VIP Rewards Program
Purchasing discounts on select products

Better Boiler Room Concepts Class | NY Location |
2025-03-07 09:00 - 12:00 | Wallace Eannace – New York, 50 Newtown Rd, Plainview, NY, 11803, United States

Electrification Made Practical (1 PDH)
2025-02-21 12:00 - 13:00 | online
Date: February 21, 2025
Time: 12 pm – 1 pm
Location: Virtual
PDH: 1.0 PDH
Trainer: Robert Barrett
This presentation looks at how power is produced at the plant level, the mix of fossil fuel and non-fossil fuel-based energy within our energy grid. “Point-of-Use” efficiency of electric appliances. The COP requirements of heat pumps are required to be at parity with condensing gas-fired units. Why “electrification” is a “green” technology, even with the current fossil fuel mix, the costs for fully electric systems versus conventional systems, and why hybrid systems make sense ecologically and financially.
Who should attend – HVAC & Plumbing engineers
1.0-PDH Duration: 1-hour PS#202411038

Residential Boiler Installation, ﻿Start-up, Service, and Maintenance | Pump selection and options | NJ Location |
2025-02-21 09:00 - 12:00 | Wallace Eannace – New Jersey, 779 Susquehanna Ave., Franklin Lakes, NJ, 07417, United States
Date: February 21, 2025
Time: 9 am – 12 pm
Agenda:

Review of Lochinvar’s line of gas-fired residential boilers
Features & benefits – how to sell them
Installation, start-up, service, and maintenance
Combustion analysis, burner adjustment, heat exchanger cleaning
Control programming parameters
Piping requirements
Venting requirements
Bell & Gossett Pumps
Water quality of closed-loop hydronic system
Contractor VIP Rewards program

At conclusion of class, each participating contractor firm will receive:

Certificate of course completion for each participant
Wallace Eannace Contractor VIP Rewards Program
Purchasing discounts on select products

Residential Boiler Installation, ﻿Start-up, Service, and Maintenance | Pump selection and options | NY Location |
2025-02-21 09:00 - 12:00 | Wallace Eannace – New York, 50 Newtown Rd, Plainview, NY, 11803, United States

Balancing Fundamentals (1 PDH)
2025-02-14 12:00 - 13:00 | online
Date: February 14, 2025
Time: 12 pm – 1 pm
Location: Virtual
PDH: 1.0 PDH
Trainer: Chris Abbott
This presentation provides a history of balancing, discussing fundamentals such as Cv value, what it is, and why it is important. Examples of unbalanced circuits and resulting overflows are shown. Pressure independent balancing is explained and current PICV technology is reviewed discussing the many benefits offered by these improved devices. Traditional VFD operation is explained and the newer “sensorless” VFD technology is discussed and demystified.
Takeaway:

Learn about the evolution of balancing valves
Understand why balancing is important and how it is accomplished in the field.
Be comfortable using Cv values to determine pressure losses at alternate flows
Learn about the newest balancing technology
Introduction of “sensorless” VFD technology that uses software and motor current sensing technology to eliminate the need for a remote pressure differential sensor to control the VFD

Who should attend: HVAC & plumbing design engineers
PDH-1.0 Duration: 1 hour PS#-202310178

Commercial DHW Installation, Start-up, Service, and Maintenance | NJ Location |
2025-02-14 09:00 - 12:00 | Wallace Eannace – New Jersey, 779 Susquehanna Ave., Franklin Lakes, NJ, 07417, United States
Date: February 14, 2025
Time: 9 am – 12 pm
Agenda:

Review of Lochinvar’s line of gas-fired commercial boilers
Features & benefits – how to sell them
Installation, start-up, service, and maintenance
Combustion analysis, burner adjustment, heat exchanger cleaning
Control programming parameters
Piping requirements
Venting requirements
Bell & Gossett Pumps
Water quality of closed-loop hydronic system
Contractor VIP Rewards program

At conclusion of class, each participating contractor firm will receive:

Certificate of course completion for each participant
Wallace Eannace Contractor VIP Rewards Program
Purchasing discounts on select products

Commercial DHW Installation, Start-up, Service, and Maintenance | NY Location |
2025-02-14 09:00 - 12:00 | Wallace Eannace – New York, 50 Newtown Rd, Plainview, NY, 11803, United States

Controlling Condensing Boilers & Water Heaters (1 PDH)
2025-02-07 12:00 - 13:00 | online
Date: February 7, 2025
Time: 12 PM – 1 PM
Location: Virtual
PDH: 1.0 PDH
Trainer: Robert Barrett
This presentation looks at the efficiency curves of condensing boilers and compares these curves to NYC weather bin data to determine the efficiency of a condensing boiler over a heating season when it is designed for non-condensing design temperatures of 180F-160F.
Boiler outside air reset control savings are compared to pump VFD savings; control options are discussed. Also, water heater piping design is demonstrated to have a large impact on domestic hot water heater efficiency. Some Lochinvar products are discussed along the way.
Takeaway:

Understand what causes a boiler to condense and how to optimize this
Detailed review of condensing boiler efficiency curves as they relate to boiler LWT-reset and NYC weather data
Compare the savings associated with boiler LWT reset versus the savings associated with constant LWT and variable speed pumping.
Discover how to make every DHW application operate in condensing mode
Understand the benefits of applying a front-end lo

Who should attend: HVAC & Plumbing design engineers
1.0-PDH Duration: 1-hour PS#20207027

Commercial DHW Installation, Start-up, Service, and Maintenance | NJ Location |
2025-02-07 09:00 - 12:00 | Wallace Eannace – New Jersey, 779 Susquehanna Ave., Franklin Lakes, NJ, 07417, United States
Date: February 7, 2025
Time: 9 am – 12 pm
Agenda:

Review of Lochinvar’s line of gas-fired commercial water heaters
Features & benefits – how to sell them
Sizing and selection
Installation, start-up, service, and maintenance
Combustion analysis, burner + heat exchanger access, removal and cleaning
Control programming parameters
Piping requirements
Venting requirements

At conclusion of class, each participating contractor firm will receive:

Certificate of course completion for each participant
Wallace Eannace Contractor VIP Rewards Program
Purchasing discounts on select products

Commercial DHW Installation, Start-up, Service, and Maintenance | NY Location |
2025-02-07 09:00 - 12:00 | Wallace Eannace – New York, 50 Newtown Rd, Plainview, NY, 11803, United States

Better Idea of Water Heating - Commercial Domestic Water Heating
2025-01-09 15:00 - 17:00, 2024-12-12 15:00 - 17:00 | Wallace Eannace – New Jersey, 779 Susquehanna Ave., Franklin Lakes, NJ, 07417, United States
Location: 779 Susquehanna Ave, Franklin Lakes, NJ 07417
Agenda:

Proper sizing
High Volume with quick circulation
Standard efficiency vs high-efficiency
Water Quality | Limescale, calcite solutions
Piping and new ideas with reverse indirects, Plate & Frame HX, and multiple units
Domestic water recirc pumps with aquastats and timers Live Fire indirect with boiler at each facility

Better Idea of Water Heating - Commercial Domestic Water Heating
2024-12-17 15:00 - 17:00 | Wallace Eannace – New York, 50 Newtown Rd, Plainview, NY, 11803, United States
Location: 50 Newtown Rd, Plainview, NY 11803
Agenda:

Proper sizing
High Volume with quick circulation
Standard efficiency vs high-efficiency
Water Quality | Limescale, calcite solutions
Piping and new ideas with reverse indirects, Plate & Frame HX, and multiple units
Domestic water recirc pumps with aquastats and timers Live Fire indirect with boiler at each facility

Modern Boiler Room Concepts
2024-03-26 09:00 - 12:00 | Webinar
BRANDS & MODELS COVERED
Bell & Gossett, Lochinvar, Danfoss, Sentinel, BoilerMag, McDonnell Miller, Zilmet

Hours: 9am – 12pm EST
Location Options: Virtual
50 Newtown Road, Plainview, NY 11803
779 Susquehanna Ave, Franklin Lakes, NJ 07417
Credits: NONE
Note: Those attending classes at one of our offices will receive lunch and can receive application support from one of our engineers at conclusion of training.
Agenda:

Basic to advanced boiler room design
Piping layouts
Individual hydronic components, how they work, and work together
Pump selection
ECM (electronically commutated motor) pumps – why, where, and how to use them.
Zoning options
Air management
Water quality in closed loop hydronic systems
Contractor VIP Rewards program

At Conclusion of Class, Each Participating Contractor Firm Will Receive:

Certificate of course completion for each participant
Contractor VIP Rewards Program

LOCHINVAR: Commercial Water Heater Installation, Start-up, Service and Maintenance
2024-03-12 09:00 - 12:00, 2024-01-09 09:00 - 12:00 | Webinar
BRANDS & MODELS COVERED
Lochinvar Commercial Domestic Water Heating: Armor, Shield, Power Fin, Copper Fin

Hours: 9am – 12pm EST
Location Options: Virtual
50 Newtown Road, Plainview, NY 11803
779 Susquehanna Ave, Franklin Lakes, NJ 07417
Credits: NONE
Note: Those attending classes at one of our offices will receive lunch and can receive application support from one of our engineers at conclusion of training.
Agenda:

Review of Lochinvar’s line of gas-fired commercial water heaters
Features & benefits – how to sell them
Sizing and selection
Installation, start-up, service, and maintenance
Combustion analysis, burner + heat exchanger access, removal and cleaning
Control programming parameters
Piping requirements
Venting requirements

At Conclusion of Class, Each Participating Contractor Firm Will Receive:

Certificate of course completion for each participant
Contractor VIP Rewards Program

LOCHINVAR | B&G | SENTINEL CLASS: Commercial Boiler Installation, Start-up, Service, and Maintenance | Pump selection and options | Water Quality
2024-02-20 09:00 - 12:00, 2023-12-12 09:00 - 12:00 | Webinar
BRANDS & MODELS COVERED
Lochinvar Commercial Boilers: Crest, FTX, Power Fin, Copper Fin
Bell & Gossett Pumps
Sentinel Boiler System Cleaner
BoilerMag Magnetite Strainer

Hours: 9am – 12pm EST
Location Options: Virtual
50 Newtown Road, Plainview, NY 11803
779 Susquehanna Ave, Franklin Lakes, NJ 07417
Credits: NONE
Note: Those attending classes at one of our offices will receive lunch and can receive application support from one of our engineers at conclusion of training.
Agenda:

Review of Lochinvar’s line of gas-fired commercial boilers
Features & benefits – how to sell them
Installation, start-up, service, and maintenance
Combustion analysis, burner adjustment, heat exchanger cleaning
Control programming parameters
Piping requirements
Venting requirements
Bell & Gossett Pumps
Water quality of closed-loop hydronic system
Contractor VIP Rewards program

At Conclusion of Class, Each Participating Contractor Firm Will Receive:

Certificate of course completion for each participant
Contractor VIP Rewards Program

LOCHINVAR | B&G | SENTINEL CLASS: Residential Boiler Installation, Start-up, Service, and Maintenance | Pump Selection and Options
2024-02-06 09:00 - 12:00 | Webinar
BRANDS & MODELS COVERED
Lochinvar Residential Boilers: Knight, Noble & Solution Boilers
Bell & Gossett Pumps
Sentinel Boiler System Cleaner, Chemicals, and Magnetic Filters

Hours: 9am – 12pm EST
Location Options: Virtual
50 Newtown Road, Plainview, NY 11803
779 Susquehanna Ave, Franklin Lakes, NJ 07417
Credits: NONE
Note: Those attending classes at one of our offices will receive lunch and can receive application support from one of our engineers at conclusion of training.
Agenda:

Review of Lochinvar’s line of gas-fired residential boilers
Features & benefits – how to sell them
Installation, start-up, service, and maintenance
Combustion analysis, burner adjustment, heat exchanger cleaning
Control programming parameters
Piping requirements
Venting requirements
Bell & Gossett Pumps
Water quality of closed-loop hydronic system
Contractor VIP Rewards program

At Conclusion of Class, Each Participating Contractor Firm Will Receive:

Certificate of course completion for each participant
Contractor VIP Rewards Program

Modern Boiler Room Concepts
2024-01-23 09:00 - 12:00 | Webinar
BRANDS & MODELS COVERED
Bell & Gossett, Lochinvar, Danfoss, Sentinel, BoilerMag, McDonnell Miller, Zilmet

Hours: 9am – 12pm EST
Location Options: Virtual
50 Newtown Road, Plainview, NY 11803
779 Susquehanna Ave, Franklin Lakes, NJ 07417
Credits: NONE
Note: Those attending classes at one of our offices will receive lunch and can receive application support from one of our engineers at conclusion of training.
Agenda:

Basic to advanced boiler room design
Piping layouts
Individual hydronic components, how they work, and work together
Pump selection
ECM (electronically commutated motor) pumps – why, where, and how to use them.
Zoning options
Air management
Water quality in closed loop hydronic systems
Contractor VIP Rewards program

At Conclusion of Class, Each Participating Contractor Firm Will Receive:

Certificate of course completion for each participant
Wallace Eannace Contractor VIP Rewards Program

In-Person: Two Training Options. 1 Day Gold Star Installer or 3 Day Gold Star Installer + EPA 608
2023-12-19 09:00 - 2023-12-21 17:00 | Live Fire Training, 10 Dunton Avenue, Deer Park, New York, 11729
Location: 10 Dunton Ave, Deer Park, NY 11729
1 Day Gold Star Installer Course Fee: $350
3 Day Gold Star Installer + EPA 608 Day Course Fee: $585
Tool Kit: $1,500 (optional). Must have flaring tool for class

Tuesday, December 19th – Gold Star Installer Class 9 AM – 5 PM
Wednesday, December 20th – EPA 608 training 9 AM – 5 PM
Thursday, December 21st – EPA 608 training & test 9 AM – 2 PM
Agenda:

Introduction to Mini-Split heat pump technology for A/C and heating
Sizing and selection
Installation, Controls, Commissioning, Maintenance, Troubleshooting
EPA 608 Basic concepts of Refrigerant Recovery
EPA 608 Basic concepts of Refrigerant System Evacuation
EPA 608 testing for Type 1,2,3 – Universal EPA Certification

Virtual: Two Training Options. 1 Day Gold Star Installer or 3 Day Gold Star Installer + EPA 608
2023-12-05 09:00 - 2023-12-07 17:00 | Webinar
Location: Online Class
1 Day Gold Star Installer Course Fee: $350
3 Day Gold Star Installer + EPA 608 Day Course Fee: $585
Tool Kit: $1,500 (optional). Must have flaring tool for class

Tuesday, December 5th – Gold Star Installer Class 9 AM – 5 PM
Wednesday, December 6th – EPA 608 training 9 AM – 5 PM
Thursday, December 7th – EPA 608 training & test 9 AM – 2 PM
Agenda:

Introduction to Mini-Split heat pump technology for A/C and heating
Sizing and selection
Installation, Controls, Commissioning, Maintenance, Troubleshooting
EPA 608 Basic concepts of Refrigerant Recovery
EPA 608 Basic concepts of Refrigerant System Evacuation
EPA 608 testing for Type 1,2,3 – Universal EPA Certification

Virtual: Two Training Options. 1 Day Gold Star Installer or 3 Day Gold Star Installer + EPA 608
2023-11-14 09:00 - 2023-11-16 17:00 | Webinar
Location: Online Class
1 Day Gold Star Installer Course Fee: $350
3 Day Gold Star Installer + EPA 608 Day Course Fee: $585
Tool Kit: $1,500 (optional). Must have flaring tool for class

Tuesday, November 14th – Gold Star Installer Class 9 AM – 5 PM
Wednesday, November 15th – EPA 608 training 9 AM – 5 PM
Thursday, November 16th – EPA 608 training & test 9 AM – 2 PM
Agenda:

Introduction to Mini-Split heat pump technology for A/C and heating
Sizing and selection
Installation, Controls, Commissioning, Maintenance, Troubleshooting
EPA 608 Basic concepts of Refrigerant Recovery
EPA 608 Basic concepts of Refrigerant System Evacuation
EPA 608 testing for Type 1,2,3 – Universal EPA Certification

LOCHINVAR | B&G | SENTINEL: Residential Boiler Installation, Start-up, Service, and Maintenance | Pump Selection and Options
2023-11-14 09:00 - 12:00 | Webinar

In-Person: Two Training Options. 1 Day Gold Star Installer or 3 Day Gold Star Installer + EPA 608
2023-10-24 09:00 - 2023-10-26 17:00 | Live Fire Training, 10 Dunton Avenue, Deer Park, New York, 11729
Location: 10 Dunton Ave, Deer Park, NY 11729
1 Day Gold Star Installer Course Fee: $350
3 Day Gold Star Installer + EPA 608 Day Course Fee: $585
Tool Kit: $1,500 (optional). Must have flaring tool for class

Tuesday, October 24th – Gold Star Installer Class 9 AM – 5 PM
Wednesday, October 25th – EPA 608 training 9 AM – 5 PM
Thursday, October 26th – EPA 608 training & test 9 AM – 2 PM
Agenda:

Introduction to Mini-Split heat pump technology for A/C and heating
Sizing and selection
Installation, Controls, Commissioning, Maintenance, Troubleshooting
EPA 608 Basic concepts of Refrigerant Recovery
EPA 608 Basic concepts of Refrigerant System Evacuation
EPA 608 testing for Type 1,2,3 – Universal EPA Certification

Virtual: Two Training Options. 1 Day Gold Star Installer or 3 Day Gold Star Installer + EPA 608
2023-10-17 09:00 - 2023-10-19 17:00 | Webinar
Location: Online Class
1 Day Gold Star Installer Course Fee: $350
3 Day Gold Star Installer + EPA 608 Day Course Fee: $585
Tool Kit: $1,500 (optional). Must have flaring tool for class

Tuesday, October 17th – Gold Star Installer Class 9 AM – 5 PM
Wednesday, October 18th – EPA 608 training 9 AM – 5 PM
Thursday, October 19th – EPA 608 training & test 9 AM – 2 PM
Agenda:

Introduction to Mini-Split heat pump technology for A/C and heating
Sizing and selection
Installation, Controls, Commissioning, Maintenance, Troubleshooting
EPA 608 Basic concepts of Refrigerant Recovery
EPA 608 Basic concepts of Refrigerant System Evacuation
EPA 608 testing for Type 1,2,3 – Universal EPA Certification

Virtual: Two Training Options. 1 Day Gold Star Installer or 3 Day Gold Star Installer + EPA 608
2023-09-12 09:00 - 2023-09-14 17:00 | Webinar
Location: Online Class
1 Day Gold Star Installer Course Fee: $350
3 Day Gold Star Installer + EPA 608 Day Course Fee: $585
Tool Kit: $1,500 (optional). Must have flaring tool for class

Tuesday, September 12th – Gold Star Installer Class 9 AM – 5 PM
Wednesday, September 13th – EPA 608 training 9 AM – 5 PM
Thursday, September 14th– EPA 608 training & test 9 AM – 2 PM
Agenda:

Introduction to Mini-Split heat pump technology for A/C and heating
Sizing and selection
Installation, Controls, Commissioning, Maintenance, Troubleshooting
EPA 608 Basic concepts of Refrigerant Recovery
EPA 608 Basic concepts of Refrigerant System Evacuation
EPA 608 testing for Type 1,2,3 – Universal EPA Certification
